An investigation has determined the cause of a huge pipeline explosion and fire at Otterburne on January 25th, 2014. The Transportation Safety Board says it was caused by a pre-existing crack in the pipeline dating back to when it was constructed about 50 years ago. It adds the crack was likely the result of inadequate, poor quality welding at a time when there was no requirement that every weld be inspected. Although no one was injured, the blast led to significant disruptions in natural gas service throughout the southeast for several days.

Here is a summary of the Board's report:

Winnipeg, Manitoba, 28 July 2015 – The Transportation Safety Board of Canada (TSB) today released its investigation report (P14H0011) into the 25 January 2014 rupture of a TransCanada PipeLines Limited pipeline. A 30-inch natural gas pipeline, Line 400-1, ruptured and ignited at the site of Mainline Valve 402 near Otterburne, Manitoba. The escaping gas burned for approximately 12 hours. Five residences in the immediate vicinity were evacuated until the fire was extinguished.

The investigation determined that Line 400-1 failed due to a fracture that occurred at a pre-existing crack that had remained stable for over 50 years prior to the occurrence. This crack had formed at the time of the pipeline's construction likely due to an inadequate welding procedure and poor welding quality. There was no requirement for inspections of every weld by radiography at the time of the pipeline's original construction.

The fracture was caused by incremental stresses to the pipeline, which were likely due to a combination of factors. These included: weakened soil support in the area due to maintenance activities over the years; record low temperatures that winter; recent work at and around the valve site that may have driven frost deeper into the ground; and thermal contraction that may have occurred when the pipeline cooled due to the absence of gas flow for 20 days prior to the occurrence.

Following the occurrence, the National Energy Board required TransCanada to perform several engineering assessments along Line 400-1. TransCanada performed numerous excavations, inspections and repairs along Line 400-1 before returning it to service. Following the pipeline's return to service, TransCanada performed in-line inspections to rule out other threats to the pipeline's integrity.

 

Read More:

Explosion Lights Up The Sky

Thousands Of Residents Dealing With Loss Of Heat

Around 200 Barns Without Natural Gas

Pipeline Back In Service Near Otterburne